Compact Busway / Busduct

DAVIS Compact Busway system is a low ampere air insulated with epoxy insulation busway designed to distribute electrical energy. This is a very economical busway design for efficient energy distribution in a wide area especially in textile mills, small medium industries, assembly lines, shopping malls and commercial buildings. DAVIS compact busways are available from 100A to 800A rated at 690VAC in a polyphase system.

Compliance of
design standards

IEC 60439-1:2004, IEC 60439-2:2005, IEC 60947-2:2003, IEC 60331 & BS 6387 & IEC 60529:2001
System voltages
1000VAC at 50Hz or 60Hz frequency
Busbar Conductor

Copper 99.98% (Composition) >98% IACS (Conductivity) Aluminium 99.98% (Composition) >61% IACS (Conductivity)
Current rating

100A – 800A for copper conductor
200A – 630A for aluminum conductor
Type of insulation
Air with epoxy insulation.
Busway housing

Galvanised Steel, Extruded Aluminium and Stainless Steel
Housing finishing
Epoxy polyester  powder coated
Ingress of protection

Indoor Installation IP42/43/44/55 & Outdoor Installation IP65/66/67

PDF Download

Compact Busway.pdf
Technical Specifications.pdf
Technical Data.pdf